|
|
Process a review of the specified electrical equipment
Lanc, Rudolf ; Mach, Martin (referee) ; Veselka, František (advisor)
The revision of the electrical equipment means verifying the state of the equipment concerning its safety. The aim of the Bachelor Thesis is the revision of the selected electrical equipment. The particular equipment will undergo a revision, measurements, supervisions, and tests, which are subject of the norms. A revision report will be issued as a result of the established facts, in which possible failures will be described. Further on eventual risks will be explained and techniques how to eliminate them proposed.
|
|
|
Burner testing
Rychter, Aleš ; Hájek, Zdeněk (referee) ; Bělohradský, Petr (advisor)
Bachelor thesis deals with testing of burners used in industrial applications. Overall is work divided into two main parts in which the first one is focused on basic classification of burners according to mixing type, fuel type and air supply system. The Second part of work is then focused on the burner tests. It describes types of tests and test environments in which the combustion tests can be carried out. In terms of tests, it is then necessary to make some important decisions, including the choices of testing fuel, combustion chamber and oxidizer, which have impact on the result. The preparation of tests also includes the developing of test procedure in which it is necessary to include the requirements of specific tests. The tests have to be carried out according to the relevant technical standards. After the realization of every test the evaluation of measured data has to be done and the test report summarizing the results of the test has to be issued. Since during the tests a number of process variables is measured like emissions, temperatures, pressures, flow rates, etc., the necessary instrumentation is described as well.
|
|
|
The issue of the revision corrected wiring residential building
Štefek, Roman ; Janda, Marcel (referee) ; Veselka, František (advisor)
Bachelor’s thesis deals with the verification of electrical installations in residential buildings. The task of the thesis is to get acquainted with the requirements of the regulations with a focus on Czech technical standard CSN 33 2000-6, CSN 33 1500 and follow-up. Specifically, the information gathered is used to the implementation of the review installations in renovated apartment building. The aim is to apply the theoretical knowledge and information for the practical verification of the electrical installation.
|
|
|
Problems of measurement and evaluation of transient resistance in electrical engineering
Štěpanovský, Libor ; Cipín, Radoslav (referee) ; Veselka, František (advisor)
The aim of the Bachelor Thesis is to introduce the revisions to electrical wirings and equipment, to get familiarized with the problems of transient resistance and with measurement of transient resistance in electrical engineering. The first part of the Thesis describes various types of revisions, the procedure to carry out revisions and the methodology that must be followed during the revision. The second part is dedicated to transient resistance. It mentions factors which influence the magnitude of transient resistance, methods used to determine the magnitude of transient resistance and a practical demonstration of a transient resistance measurement.
|
|
|
Legal nature of technical regulations and technical standards
Korec, Jakub ; Staša, Josef (advisor) ; Sharp, Vladimír (referee)
1 Legal nature of technical regulations and technical standards Abstract This thesis deals with the question of the legal nature of technical regulations and technical standards. The position of both types of documents is quite different, because unlike technical standards, technical regulations are legal regulations. In particular, the legal nature of technical standards has changed over time. The aim of this thesis is to define both types of documents with regard to their nature in relation to law and the legal system, as well as to each other. The thesis is divided, if the introduction and conclusion are not counted, into seven chapters. The first chapter deals with the question of the development of legislation of technical regulations and technical standards. In both cases, past legislation was compared with current legislation. In the case of technical regulations, the issue of non-compliance of this definition with the definition of technical regulations in EU legislation and international treaties is addressed here, which resulted in the need to create a category of technical documents. This chapter also deals with the question of the classification of both types of documents within the legal system of the Czech Republic. The second chapter is devoted to the creation of technical regulations and...
|
|
| |
|
|
Problems of measurement and evaluation of transient resistance in electrical engineering
Štěpanovský, Libor ; Cipín, Radoslav (referee) ; Veselka, František (advisor)
The aim of the Bachelor Thesis is to introduce the revisions to electrical wirings and equipment, to get familiarized with the problems of transient resistance and with measurement of transient resistance in electrical engineering. The first part of the Thesis describes various types of revisions, the procedure to carry out revisions and the methodology that must be followed during the revision. The second part is dedicated to transient resistance. It mentions factors which influence the magnitude of transient resistance, methods used to determine the magnitude of transient resistance and a practical demonstration of a transient resistance measurement.
|
|
|
Process a review of the specified electrical equipment
Lanc, Rudolf ; Mach, Martin (referee) ; Veselka, František (advisor)
The revision of the electrical equipment means verifying the state of the equipment concerning its safety. The aim of the Bachelor Thesis is the revision of the selected electrical equipment. The particular equipment will undergo a revision, measurements, supervisions, and tests, which are subject of the norms. A revision report will be issued as a result of the established facts, in which possible failures will be described. Further on eventual risks will be explained and techniques how to eliminate them proposed.
|
|
| |
|
|
The issue of the revision corrected wiring residential building
Štefek, Roman ; Janda, Marcel (referee) ; Veselka, František (advisor)
Bachelor’s thesis deals with the verification of electrical installations in residential buildings. The task of the thesis is to get acquainted with the requirements of the regulations with a focus on Czech technical standard CSN 33 2000-6, CSN 33 1500 and follow-up. Specifically, the information gathered is used to the implementation of the review installations in renovated apartment building. The aim is to apply the theoretical knowledge and information for the practical verification of the electrical installation.
|
guest ::
